Yes, we are the original equipment manufacturer(OEM).
Injection Molding Melt Temperature Challenge, Conquered!
Level-Up with Simple, Low-Cost Melt Temperature Measurement System
Save
Reduce Defective Parts
Fast
Measure in 1 minute or less
Safe
No hand in or near purge
Bullet Proof
PPAP & medical validations
Strength, Durability and Appearance
Consistent Part Quality Depends on Melt Temperature Accuracy.
Variation in temperature coming out of the barrel results in defective and wasted parts that increase production costs. Existing melt temperature measurement isn't precise or reliable enough to ensure optimal molding conditions.
Mis-calculated melt temperature costs you time, money and threatens PPAP & validations
Inconsistent temp measurement = inconsistent product output & waste
Frustrated by inconsistent measurement person to person?
Tired of trying to Measure melt temperature before resin "skins" over?
Handling molten resin is an accident waiting to happen
4 Simple Steps to Melt Temperature Accuracy
1
Insert thermocouple probe into purge puck
2
Position magnetic purge puck at the barrel injection unit
3
Run the barrel back in and purge into the puck (only 1 oz of resin)
4
Get a perfect, repeatable temperature reading every time
Repeatable. Accurate. Simple.
Melt Temperature Measurement System Saves Time, Money and Frustration.
How Does Melt Temp Management Systems Work?
The easily assembled MTMS Purge Puck is highly insulated and designed to position our proprietary, heavy-duty thermocouple in the effective flow path of the material or purge.
Magnetized, the purge puck quickly and easily attaches to the injection unit.
The precise positioning of our unique thermocouple eliminates human error and gives repeatable and accurate melt temperature +/- 1% before the material "freezes" or "skins" every time.
Frequently Asked QuestionsLeading Companies Use MTMS for Quality Control
In the News
Melt Temperature Measurement: An Objective Comparison
Melt Temperature is One of the Critical Variables in Injection Molding
Mastering all four reduces production down time and ensures a high-quality, consistent product.
Repeatable, accurate and simple Melt Temperature Measurement System will Save You Time, Money and Frustration.
- Faster: 1 min vs 10 min Melt Temperature measurement time.
- No need to handle Molten Resin
- Eliminate Human Variability & Inconsistency
- Bullet Proof PPAP & Medical Validation
Level up your Melt Temperature Measurement Now
×
Frequently Asked Questions
MTMS KIT--Works on all presses with a standard 4 inch locating ring and with standard nozzles with either a 1/2 or 3/4 inch radius. EUROMAP presses. An adaptor is available for various locating ring sizes and the ring can be modified for various nozzle types.
It works on most materials except for mineral and high glass-filled materials do to it’s thermoconductivity gives up the heat too rapidly which will give more variable in the readings.
The purge will solidify immediately and probe damage may occur.
The pyrometer is interchangeable between a Type K and J. The MTMS thermocouple is a type K. The pyrometer must be set to type K. To set-- push the Type button on the keypad on the pyrometer until the "K" appears on the screen. Now retest for the correct temperature.
Also, the MTMS thermocouple probes are specifically engineered with a “dead stop” and for extremely fast response times. Other probes will not work with the MTMS kit.
The MTMS pyrometer is fast response with “peak hold” pyrometer and must be used to get accurate and repeatable readings.
From 1 ounce to 10 pounds.
It may not be a problem. Some materials stick to the insulator cup and the ring may stay with the nozzle when retracted and the purge puck stays with the mold. If this happens the thermocouple probe may be bent or damaged.
Both ½- or ¾-inch radius
+/-1% on most materials.
The purge stays molten due to the insulating properties of the cup. Also, the wiping action of the flowing material going over the probe eliminates skinning on the probe. With the elimination of the skin, which is an insulator, the maximum temperature is obtained and recorded.
It can be carefully straightened or go the Products page to purchase a replacement.
Yes. Type K with mini plugs.
No. We are in the development stages of designing a locating system to work. Contact MTMS for an update.
No. Single use only. Go to Products page to reorder.
